Louvers, Vents and Grilles for the HVAC Industry - Diamond Wood Gable Vents

All Products Made in America.

Call Toll Free: (866) 257-7449

Shopping Cart
Cart Items : 0
Sub Total : $0.00

View Cart | Checkout

Follow us on Facebook:

Best Louver Banner

Welcome to Bestlouver.com

Diamond Wood Gable Vents

Diamond Wood Gable Vents

Click to enlarge

Diamond Wood Gable Vents


Available Options:

Build Dimension:


Diamond - Size/Wood:

Surface Finish:

Trim Profiles:

Bestlouver offers the highest quality Wood Gable Vents on the market. Our made-to-order wood louvers are manufactured from western red cedar, pine, pressure treated pine (PT) and cypress. See our VERSATEX section for PVC. All our wood louvers are built from select clear lumber guaranteeing you the finest looking product and the best finish available. We offer a wide variety of standard sizes in 2" increments but will manufacture to any custom size. If you do not see the size you need call and we can make it for you.
Toll Free 866-257-7449

- All surfaces are smooth and paintable if desired
The gable vent is mounted by nailing through the face trim into the siding.
- All gable vents are fitted with aluminum screening on back of louver box.

We offer three different Build Dimensions (order size) depending on your installation requirements. RO is the most common. Please see photos for illustrations of the following:
RO: Your order size is the size of your Rough Opening (RO) and we will reduce the louver 0.5" to fit.
AB: Actual Box (AB) is the actual build size of the louver box on back of the louver. No reduction.
AT: Your order size is the Actual Trim (AT) dimension from outside trim to outside trim. No reduction.

- Vent box mounts through rough opening, face trim is used for securing vent to exterior wall.
- Order size for standard mount is the size of your rough opening. We undersize the louver box by half an inch. Trim overhangs box by 2".
- The vent box is constructed of 3/4" x 2 3/4" material and is 3" deep.
- The face trim is attached to the front of the vent box. The 2 3/4" flat trim over hangs the vent box 2".
- The louvers are 3/4" x 3 1/2" set in the vent box at a 30 deg angle.
- The louvers are spaced 3" apart and overlap each other 3/4".

- Vent box mounts flush to exterior wall. Secured through face trim.
- Order size for surface mount is outside to outside trim edge size. For example a 24" surface mount has a measurement of 24" from side to side.
- The louver from face trim to back of louver box is 1.5" deep.
- The vent box is 1 1/4" deep.
- The 1.5" face trim is attached to the front of the vent box overlapping vent box by 0.25". Square edge profile only, no other profiles are available. See drawing.
- The louvers are 1/2" x 2 3/4" set in the vent box at a 30 deg angle.
- The louvers are spaced 2.25" apart and overlap each other 1.2" or they can be closed, see drawing.

- Standard - Square Edge measures 2 3/4"w x 3/4"h and is attached to the front of the 3/4" x 3" deep louver box. Trim overhangs box 1 7/8". Edges of trim are square.
- Brick Mold - Standard measures 2"w x 1 1/8"h and is attached to the front of the 3/4" x 3" deep louver box. Trim overhangs box 1 1/4". See specification sheet for outer edge profile.

Pricing in the pulldown menu are just a few of the size we offer.

Our vents are made to order, for large orders please allow up to 10 working days to ship. Returns are subject to a 50% restocking fee.


For More Information:
Sales/Tech: 866-257-7449 Ext 701
Email: mjhbestlouver@aol.com

Bestlouver.com LLC
Naples, Florida 34114

Click the blue product specification link above for technical info.
Related Categories
Related Manufacturers